Mini Mill and Mini Lathe Housing for MacPod.net Tachometer Electronics.

$25.00

Description

Jeff at MagPod.net makes a reasonably priced EXCELLENT Tachometer for the LittleMachineShop, MicroMart and other Mills and Lathes listed on the MacPod site. But, he makes only the tach board and wiring. You are left to your own devices to create an enclosure to house it. There are various renditions on Jeff’s site.

Edit: Wow, there are many more housings on the MacPod site since the last time I looked. 🙂

So, I fired up the 3D Printer and Laser and we came up with this. Super-Easy install. You’ll need a Dremel/pocket knife/heated X-Acto type blade/X-Acto saw/drill or coping saw to cut the plastic after using a Sharpie to make the slot. It does not need to be perfect, you’ll have a box covering to slot. Attach the wires per the MacPod instructions, stick thru the hole, peel the 3M tape off the back of the housing back and stick. Use the four screws to mount the circuitry into the box. Plug harness into the board and snap onto the back. There are tabs on the left and right to engage the two pieces together.

Link to the MacPod Tach: https://macpod.net/misc/sx2_tachometer/sx2_tachometer_kit_v2.php

 

 

Additional information

Weight .2 lbs
Cart
ER32 Collet Box/Organizer
$228.00
×
REAR Rocker Tool Post For Taig Micro Lathe
$315.00
×
Magnetic Mill Jack Set
$171.00
×
Magnetic Dial Indicator
$140.00
×
Taig Delrin T-Slot Chip Cleaner
$25.00
×
Mini Mill and Mini Lathe Housing for MacPod.net Tachometer Electronics.
$450.00
×
30º 45º 60º Vise Angle Guides
$32.00
×
Mini Mill Chip Guard Shield
$525.00
×
EMERGENCY!! 10mm Socket
$200.00
×
EARLY Cast Taig or Peatool Micro Lathe II Digital Read Out DRO
$90.00
×
ER11 Collet Box/Organizer
$140.00
×
Taig Micro Lathe End Cap
$12.00
×
Magnetic Mini Mill Micro Limit Switch Assemblies
$36.00
×
Sieg Mini Mill Intermediate 30T Gear
$48.00
×
65mm Bauer/Makita Trim Router Spacer
$30.00
×
ER16 Collet Box/Organizer
$20.00
×
Mini Mill T-Slot Cleaner
$15.00
×
Placeholder671B2590 O-Ring
$24.30
×
Mini Mill Spindle LED Light
$120.00
×
Mini Lathe Carriage Stop
$16.00
×
Taig Micro Lathe Spindle Lock
$18.00
×
KWICK Korner Tool
$20.00
×
SainSmart CNC 3018 Router Electronics Box w/Fan
$22.00
×
Thumb Driver 1/4" Hex
$6.00
×
Mini Lathe Magnetic Chuck Stop
$12.00
×