Mini Lathe Magnetic Chuck Stop

$12.00

Description

For Mini Lathe and Micro Lathe three jaw chucks. 1/4″ thick acrylic, three strong 6mm Neodymium magnets. Makes aligning a spacer that needs to be turned much easier. Allows small and short parts to project past the chuck jaws, and not fall inside the bore.

These are inexpensive, if you need a thicker 1/2″ spacer these can be stacked.  If you are going for 0.0001″, a dial indicator and four independent jaw chuck are necessary. But if you are wanting to size something for a chair leg, this is your tool!

If your chuck has a grease fitting inline with one of the chuck stop arms, you will need to relieve the arm.

Sold Each

Additional information

Weight .1 lbs
Cart
Magnetic Mini Mill Micro Limit Switch Assemblies
$48.00
×
Mini Lathe 7x Slow Feed Gear Set 15/80-90T
$39.00
×
Mini Lathe Magnetic Chuck Stop
$12.00
×
Mini Lathe Carriage Stop
$8.00
×
Magnetic Mill Jack Set
$171.00
×
Mini Mill Chip Guard Shield
$70.00
×
Taig Micro Lathe Spindle Lock
$90.00
×
ER16 Collet Box/Organizer
$40.00
×
ER11 Collet Box/Organizer
$20.00
×
EMERGENCY!! 10mm Socket
$80.00
×
5/16" Indexable Carbide Lathe Tool Set
$150.00
×
ER32 Collet Box/Organizer
$12.00
×
Sain Smart 3018 CNC Router Y Axis Bearings and Acme Block Set
$150.00
×
Sieg Mini Mill Intermediate 30T Gear
$12.00
×
Lenox 5'2" (62") Bandsaw Blade 14-18 TPI 3/8" Bi-Metal
$360.00
×
Mini Mill Spindle LED Light
$60.00
×
30º 45º 60º Vise Angle Guides
$24.00
×
Magnetic Dial Indicator
$35.00
×
EARLY Cast Taig or Peatool Micro Lathe II Digital Read Out DRO
$45.00
×
Thumb Driver 1/4" Hex
$3.00
×
Taig DRO Dial Read Out
$70.00
×
Taig Delrin T-Slot Chip Cleaner
$2.50
×
Mini Mill Spindle Square
$85.00
×
REAR Rocker Tool Post For Taig Micro Lathe
$45.00
×