Loctite 380 Black Max For GlowForge Lid Hinge

$12.00

Category:

Description

Small tube of magic! Rubberized SuperGlue. Bonds to almost anything. Will hold your mirror to car windsheild in Arizona summer heat for years…My wife’s Hyundai Santa Fe is proof.

Slow drying, be any CA/SuperGlue accelerator speeds it up. Clean, glue, line up, double check, brush a bit of accelerator on the edge, let dry for a few hours.

DOUBLE CHECK the alignment before accelerator as if you mess up, you cannot “fix” it.

Small tube, 0.1 fluid ounce.

Additional information

Weight .1 lbs
Cart
PlaceholderHarbor Flood Light
$64.00
×
Thumb Driver 1/4" HexThumb Driver 1/4" Hex
$9.00
×
Mini Lathe Magnetic Chuck StopMini Lathe Magnetic Chuck Stop
$12.00
×
GlowForge Tygon Coolant HoseGlowForge Tygon Coolant Hose
$44.00
×
Magnetic Dial IndicatorMagnetic Dial Indicator
$140.00
×
GlowForge Black Lid CableGlowForge Black Lid Cable
$70.00
×
ER16 Collet Box/OrganizerER16 Collet Box/Organizer
$10.00
×
Taig Delrin T-Slot Chip CleanerTaig Delrin T-Slot Chip Cleaner
$5.00
×
GlowForge Gantry Pulley / WheelGlowForge Gantry Pulley / Wheel
$12.50
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$60.00
×
Mini Mill Chip Guard ShieldMini Mill Chip Guard Shield
$35.00
×
Genuine GlowForge Front Carriage Pulley V-WheelGenuine GlowForge Front Carriage Pulley V-Wheel
$40.00
×
GlowForge Basic/Plus/Pro "Performance" Airfilter Replacement CartridgeGlowForge Basic/Plus/Pro "Performance" Airfilter Replacement Cartridge
$458.00
×
Magnetic Mill Jack SetMagnetic Mill Jack Set
$19.00
×
Magnetic Mill Vise Parallel HoldersMagnetic Mill Vise Parallel Holders
$8.00
×
GlowForge Rear Exhaust ExtensionGlowForge Rear Exhaust Extension
$15.00
×
ER32 Collet Box/OrganizerER32 Collet Box/Organizer
$24.00
×
REAR Rocker Tool Post For Taig Micro LatheREAR Rocker Tool Post For Taig Micro Lathe
$45.00
×
Caliper HangerCaliper Hanger
$9.00
×
Taig Micro Lathe Spindle LockTaig Micro Lathe Spindle Lock
$18.00
×
3" KURT Vise Restoration Kit3" KURT Vise Restoration Kit
$35.00
×
Rocker Tool Post for Taig Micro LatheRocker Tool Post for Taig Micro Lathe
$70.00
×
65mm Bauer/Makita Trim Router Spacer65mm Bauer/Makita Trim Router Spacer
$10.00
×
Mini Lathe 7x Slow Feed Gear Set 15/80-90TMini Lathe 7x Slow Feed Gear Set 15/80-90T
$39.00
×
Mini Mill Spindle SquareMini Mill Spindle Square
$85.00
×
Glycol Coolant For GlowForgeGlycol Coolant For GlowForge
$15.00
×