Loctite 380 Black Max For GlowForge Lid Hinge

$12.00

Category:

Description

Small tube of magic! Rubberized SuperGlue. Bonds to almost anything. Will hold your mirror to car windsheild in Arizona summer heat for years…My wife’s Hyundai Santa Fe is proof.

Slow drying, be any CA/SuperGlue accelerator speeds it up. Clean, glue, line up, double check, brush a bit of accelerator on the edge, let dry for a few hours.

DOUBLE CHECK the alignment before accelerator as if you mess up, you cannot “fix” it.

Small tube, 0.1 fluid ounce.

Additional information

Weight .1 lbs
Cart
GlowForge Idler Pulley Wheel With BearingsGlowForge Idler Pulley Wheel With Bearings
$25.00
×
Taig Micro Lathe Spindle LockTaig Micro Lathe Spindle Lock
$36.00
×
Mini Mill T-Slot CleanerMini Mill T-Slot Cleaner
$6.00
×
30º 45º 60º Vise Angle Guides30º 45º 60º Vise Angle Guides
$16.00
×
Mini Lathe Magnetic Chuck StopMini Lathe Magnetic Chuck Stop
$12.00
×
Loctite 380 Black Max For GlowForge Lid HingeLoctite 380 Black Max For GlowForge Lid Hinge
$12.00
×
Mini Mill Chip Guard ShieldMini Mill Chip Guard Shield
$35.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$40.00
×
GlowForge Laser Tube Alignment TargetsGlowForge Laser Tube Alignment Targets
$75.00
×
Taig DRO Dial Read OutTaig DRO Dial Read Out
$140.00
×
GlowForge Tygon Coolant HoseGlowForge Tygon Coolant Hose
$44.00
×
Mini Mill Spindle LED LightMini Mill Spindle LED Light
$180.00
×
Magnetic Mini Mill Micro Limit Switch AssembliesMagnetic Mini Mill Micro Limit Switch Assemblies
$12.00
×
Glycol Coolant For GlowForgeGlycol Coolant For GlowForge
$15.00
×
ER16 Collet Box/OrganizerER16 Collet Box/Organizer
$20.00
×
PlaceholderHarbor Flood Light
$16.00
×
Magnetic Mill Jack SetMagnetic Mill Jack Set
$38.00
×
Magnetic Mill Vise Parallel HoldersMagnetic Mill Vise Parallel Holders
$24.00
×
iSuck Mill T-Slot Shop Vacuum Cleaning NozzleiSuck Mill T-Slot Shop Vacuum Cleaning Nozzle
$20.00
×
Three Inch Mill Vise Vice Speed HandleThree Inch Mill Vise Vice Speed Handle
$19.00
×
Taig Delrin T-Slot Chip CleanerTaig Delrin T-Slot Chip Cleaner
$2.50
×
3" KURT Vise Restoration Kit3" KURT Vise Restoration Kit
$35.00
×
Rocker Tool Post for Taig Micro LatheRocker Tool Post for Taig Micro Lathe
$35.00
×
Thumb Driver 1/4" HexThumb Driver 1/4" Hex
$3.00
×
ER32 Collet Box/OrganizerER32 Collet Box/Organizer
$12.00
×
Mini Mill Spindle SquareMini Mill Spindle Square
$85.00
×
Mini Mill and Mini Lathe Housing for MacPod.net Tachometer Electronics.Mini Mill and Mini Lathe Housing for MacPod.net Tachometer Electronics.
$25.00
×