Glycol Coolant For GlowForge

$15.00

Category:

Description

The proper coolant for your GlowForge C02 Laser is Propylene Glycol, mixed at 30% mixed with distilled water. This eight ounce bottle, mixed with seventeen ounces of distilled water, is the proper coolant mixture.

Additional information

Weight .9 lbs

Related products

Remove GlowForge Rear Exhaust ExtensionGlowForge Rear Exhaust Extension
Remove Bandsaw Leveling FeetBandsaw Leveling Feet
Remove GlowForge Tygon Coolant HoseGlowForge Tygon Coolant Hose
Remove Late Taig or Peatool Micro Lathe II Digital Read Out DROLate Taig or Peatool Micro Lathe II Digital Read Out DRO
Remove GlowForge Idler Pulley Wheel With BearingsGlowForge Idler Pulley Wheel With Bearings
Remove Glycol Coolant For GlowForgeGlycol Coolant For GlowForge
Remove GlowForge Laser BeltsGlowForge Laser Belts
Remove GlowForge Gantry Pulley / WheelGlowForge Gantry Pulley / Wheel
Remove Taig Collet Box/OrganizerTaig Collet Box/Organizer
Remove Caliper HangerCaliper Hanger
Remove WiregrassMade.com GlowForge Service CenterWiregrassMade.com GlowForge Service Center
Remove GlowForge White Camera Lid CableGlowForge White Camera Lid Cable
Remove GlowForge Laser Tube Alignment TargetsGlowForge Laser Tube Alignment Targets
Cart
Loctite 380 Black Max For GlowForge Lid HingeLoctite 380 Black Max For GlowForge Lid Hinge
$36.00
×
65mm Bauer/Makita Trim Router Spacer65mm Bauer/Makita Trim Router Spacer
$10.00
×
GlowForge Gantry Pulley / WheelGlowForge Gantry Pulley / Wheel
$12.50
×
3" KURT Vise Restoration Kit3" KURT Vise Restoration Kit
$35.00
×
Magnetic Mill Vise Parallel HoldersMagnetic Mill Vise Parallel Holders
$8.00
×
Caliper HangerCaliper Hanger
$3.00
×
GlowForge Laser Tube Alignment TargetsGlowForge Laser Tube Alignment Targets
$25.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$20.00
×
Magnetic Mill Jack SetMagnetic Mill Jack Set
$19.00
×
Mini Mill Chip Guard ShieldMini Mill Chip Guard Shield
$35.00
×
Taig Micro Lathe Spindle LockTaig Micro Lathe Spindle Lock
$18.00
×
GlowForge Rear Exhaust ExtensionGlowForge Rear Exhaust Extension
$75.00
×
PlaceholderHarbor Flood Light
$32.00
×
GlowForge Rear Carriage Tray Pulley WheelGlowForge Rear Carriage Tray Pulley Wheel
$30.00
×
Magnetic Mini Mill Micro Limit Switch AssembliesMagnetic Mini Mill Micro Limit Switch Assemblies
$12.00
×
Thumb Driver 1/4" HexThumb Driver 1/4" Hex
$3.00
×
Mini Mill and Mini Lathe Housing for MacPod.net Tachometer Electronics.Mini Mill and Mini Lathe Housing for MacPod.net Tachometer Electronics.
$25.00
×
GlowForge Idler Pulley Wheel With BearingsGlowForge Idler Pulley Wheel With Bearings
$12.50
×
Mini Mill T-Slot CleanerMini Mill T-Slot Cleaner
$3.00
×
Glycol Coolant For GlowForgeGlycol Coolant For GlowForge
$15.00
×
GlowForge Black Lid CableGlowForge Black Lid Cable
$70.00
×
Checkout
-
$70.00