Mini Lathe Magnetic Chuck Stop

$12.00

Description

For Mini Lathe and Micro Lathe three jaw chucks. 1/4″ thick acrylic, three strong 6mm Neodymium magnets. Makes aligning a spacer that needs to be turned much easier. Allows small and short parts to project past the chuck jaws, and not fall inside the bore.

These are inexpensive, if you need a thicker 1/2″ spacer these can be stacked.  If you are going for 0.0001″, a dial indicator and four independent jaw chuck are necessary. But if you are wanting to size something for a chair leg, this is your tool!

If your chuck has a grease fitting inline with one of the chuck stop arms, you will need to relieve the arm.

Sold Each

Additional information

Weight .1 lbs
Cart
Magnetic Mini Mill Micro Limit Switch Assemblies
$72.00
×
Magnetic Mill Jack Set
$190.00
×
Taig DRO Dial Read Out
$70.00
×
30º 45º 60º Vise Angle Guides
$48.00
×
ER11 Collet Box/Organizer
$40.00
×
Lenox 5'2" (62") Bandsaw Blade 14-18 TPI 3/8" Bi-Metal
$300.00
×
Placeholder671B2590 O-Ring
$8.10
×
KWICK Korner Tool
$20.00
×
Mini Mill and Mini Lathe Housing for MacPod.net Tachometer Electronics.
$50.00
×
Magnetic Dial Indicator
$140.00
×
EMERGENCY!! 10mm Socket
$220.00
×
Taig Micro Lathe Spindle Lock
$90.00
×
5/16" Indexable Carbide Lathe Tool Set
$375.00
×
Three Inch Mill Vise Vice Speed Handle
$19.00
×
Sain Smart 3018 CNC Router Y Axis Bearings and Acme Block Set
$150.00
×
Mini Mill Spindle Square
$170.00
×
ER32 Collet Box/Organizer
$36.00
×
Mini Lathe Carriage Stop
$8.00
×
Placeholder670B2016 O-Ring
$1.10
×
ER16 Collet Box/Organizer
$50.00
×
Thumb Driver 1/4" Hex
$3.00
×
Mini Mill T-Slot Cleaner
$6.00
×
Mini Mill Chip Guard Shield
$35.00
×
Mini Mill Spindle LED Light
$60.00
×
REAR Rocker Tool Post For Taig Micro Lathe
$90.00
×
Mini Lathe Magnetic Chuck Stop
$12.00
×
SainSmart CNC 3018 Router Electronics Box w/Fan
$44.00
×
Late Taig or Peatool Micro Lathe II Digital Read Out DRO
$90.00
×