Loctite 380 Black Max For GlowForge Lid Hinge

$12.00

Category:

Description

Small tube of magic! Rubberized SuperGlue. Bonds to almost anything. Will hold your mirror to car windsheild in Arizona summer heat for years…My wife’s Hyundai Santa Fe is proof.

Slow drying, be any CA/SuperGlue accelerator speeds it up. Clean, glue, line up, double check, brush a bit of accelerator on the edge, let dry for a few hours.

DOUBLE CHECK the alignment before accelerator as if you mess up, you cannot “fix” it.

Small tube, 0.1 fluid ounce.

Additional information

Weight .1 lbs
Cart
65mm Bauer/Makita Trim Router Spacer65mm Bauer/Makita Trim Router Spacer
$20.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$60.00
×
Thumb Driver 1/4" HexThumb Driver 1/4" Hex
$42.00
×
PlaceholderHarbor Flood Light
$32.00
×
Loctite 380 Black Max For GlowForge Lid HingeLoctite 380 Black Max For GlowForge Lid Hinge
$60.00
×
Rocker Tool Post for Taig Micro LatheRocker Tool Post for Taig Micro Lathe
$70.00
×
GlowForge Tygon Coolant HoseGlowForge Tygon Coolant Hose
$66.00
×
Taig Delrin T-Slot Chip CleanerTaig Delrin T-Slot Chip Cleaner
$5.00
×
ER16 Collet Box/OrganizerER16 Collet Box/Organizer
$20.00
×
Magnetic Dial IndicatorMagnetic Dial Indicator
$175.00
×
ER32 Collet Box/OrganizerER32 Collet Box/Organizer
$24.00
×
GlowForge Rear Carriage Tray Pulley WheelGlowForge Rear Carriage Tray Pulley Wheel
$30.00
×
Mini Lathe Magnetic Chuck StopMini Lathe Magnetic Chuck Stop
$24.00
×
Magnetic Mini Mill Micro Limit Switch AssembliesMagnetic Mini Mill Micro Limit Switch Assemblies
$12.00
×
GlowForge Rear Exhaust ExtensionGlowForge Rear Exhaust Extension
$15.00
×
REAR Rocker Tool Post For Taig Micro LatheREAR Rocker Tool Post For Taig Micro Lathe
$45.00
×
GlowForge Basic/Plus/Pro "Performance" Airfilter Replacement CartridgeGlowForge Basic/Plus/Pro "Performance" Airfilter Replacement Cartridge
$458.00
×
EARLY Cast Taig or Peatool Micro Lathe II Digital Read Out DROEARLY Cast Taig or Peatool Micro Lathe II Digital Read Out DRO
$90.00
×
Genuine GlowForge Front Carriage Pulley V-WheelGenuine GlowForge Front Carriage Pulley V-Wheel
$40.00
×
Glycol Coolant For GlowForgeGlycol Coolant For GlowForge
$45.00
×
GlowForge Black Lid CableGlowForge Black Lid Cable
$140.00
×
Mini Mill Spindle SquareMini Mill Spindle Square
$85.00
×
Mini Mill Spindle LED LightMini Mill Spindle LED Light
$120.00
×
Mini Lathe 7x Slow Feed Gear Set 15/80-90TMini Lathe 7x Slow Feed Gear Set 15/80-90T
$39.00
×
Placeholder671B2590 O-Ring
$8.10
×
Late Taig or Peatool Micro Lathe II Digital Read Out DROLate Taig or Peatool Micro Lathe II Digital Read Out DRO
$45.00
×
GlowForge Gantry Pulley / WheelGlowForge Gantry Pulley / Wheel
$25.00
×
Taig Micro Lathe Spindle LockTaig Micro Lathe Spindle Lock
$18.00
×
Placeholder670B2016 O-Ring
$1.10
×
GlowForge Idler Pulley Wheel With BearingsGlowForge Idler Pulley Wheel With Bearings
$12.50
×
KWICK Korner ToolKWICK Korner Tool
$10.00
×
iSuck Mill T-Slot Shop Vacuum Cleaning NozzleiSuck Mill T-Slot Shop Vacuum Cleaning Nozzle
$10.00
×
Mini Mill and Mini Lathe Housing for MacPod.net Tachometer Electronics.Mini Mill and Mini Lathe Housing for MacPod.net Tachometer Electronics.
$25.00
×