Glycol Coolant For GlowForge

$15.00

Category:

Description

The proper coolant for your GlowForge C02 Laser is Propylene Glycol, mixed at 30% mixed with distilled water. This eight ounce bottle, mixed with seventeen ounces of distilled water, is the proper coolant mixture.

Additional information

Weight .9 lbs

Related products

Remove EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
Remove GlowForge Laser Tube Alignment ShimsGlowForge Laser Tube Alignment Shims
Remove Late Taig or Peatool Micro Lathe II Digital Read Out DROLate Taig or Peatool Micro Lathe II Digital Read Out DRO
Remove Taig DRO Dial Read OutTaig DRO Dial Read Out
Remove GlowForge Laser Tube Alignment TargetsGlowForge Laser Tube Alignment Targets
Remove iSuck Mill T-Slot Shop Vacuum Cleaning NozzleiSuck Mill T-Slot Shop Vacuum Cleaning Nozzle
Remove 3D Printed Vise Soft Jaws3D Printed Vise Soft Jaws
Remove GlowForge Laser BeltsGlowForge Laser Belts
Cart
ER11 Collet Box/OrganizerER11 Collet Box/Organizer
$10.00
×
PlaceholderHarbor Flood Light
$48.00
×
Taig DRO Dial Read OutTaig DRO Dial Read Out
$35.00
×
Taig Delrin T-Slot Chip CleanerTaig Delrin T-Slot Chip Cleaner
$2.50
×
Mini Mill T-Slot CleanerMini Mill T-Slot Cleaner
$3.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$40.00
×
GlowForge Laser Tube Alignment TargetsGlowForge Laser Tube Alignment Targets
$25.00
×
Mini Mill Chip Guard ShieldMini Mill Chip Guard Shield
$35.00
×
Mini Mill Spindle SquareMini Mill Spindle Square
$85.00
×
Magnetic Dial IndicatorMagnetic Dial Indicator
$35.00
×
Thumb Driver 1/4" HexThumb Driver 1/4" Hex
$3.00
×
Loctite 380 Black Max For GlowForge Lid HingeLoctite 380 Black Max For GlowForge Lid Hinge
$12.00
×
GlowForge Gantry Pulley / WheelGlowForge Gantry Pulley / Wheel
$25.00
×
Late Taig or Peatool Micro Lathe II Digital Read Out DROLate Taig or Peatool Micro Lathe II Digital Read Out DRO
$45.00
×
Checkout
-
$45.00