Mini Lathe Magnetic Chuck Stop

$12.00

Description

For Mini Lathe and Micro Lathe three jaw chucks. 1/4″ thick acrylic, three strong 6mm Neodymium magnets. Makes aligning a spacer that needs to be turned much easier. Allows small and short parts to project past the chuck jaws, and not fall inside the bore.

These are inexpensive, if you need a thicker 1/2″ spacer these can be stacked.  If you are going for 0.0001″, a dial indicator and four independent jaw chuck are necessary. But if you are wanting to size something for a chair leg, this is your tool!

If your chuck has a grease fitting inline with one of the chuck stop arms, you will need to relieve the arm.

Sold Each

Additional information

Weight .1 lbs
Cart
30º 45º 60º Vise Angle Guides
$24.00
×
Mini Mill Spindle LED Light
$300.00
×
EMERGENCY!! 10mm Socket
$140.00
×
ER16 Collet Box/Organizer
$30.00
×
Thumb Driver 1/4" Hex
$15.00
×
Mini Mill and Mini Lathe Housing for MacPod.net Tachometer Electronics.
$75.00
×
Taig Micro Lathe Spindle Lock
$144.00
×
Ryobi PBLHV701 Stick Vacuum Wall Mount Bracket
$67.50
×
Magnetic Dial Indicator
$210.00
×
Sain Smart 3018 CNC Router Y Axis Bearings and Acme Block Set
$225.00
×
Mini Mill Spindle Square
$425.00
×
5/16" Indexable Carbide Lathe Tool Set
$600.00
×
Magnetic Mini Mill Micro Limit Switch Assemblies
$96.00
×
Magnetic Mill Jack Set
$171.00
×
Taig Delrin T-Slot Chip Cleaner
$2.50
×
Mini Mill Chip Guard Shield
$35.00
×
Three Inch Mill Vise Vice Speed Handle
$38.00
×
ER11 Collet Box/Organizer
$20.00
×
Loctite 380 Black Max For GlowForge Lid Hinge
$36.00
×
Late Taig or Peatool Micro Lathe II Digital Read Out DRO
$135.00
×
ER32 Collet Box/Organizer
$24.00
×
Mini Mill T-Slot Cleaner
$12.00
×
SainSmart CNC 3018 Router Electronics Box w/Fan
$88.00
×
Rocker Tool Post for Taig Micro Lathe
$140.00
×
Mini Lathe Magnetic Chuck Stop
$36.00
×
GlowForge Black Lid Cable
$105.00
×
3" KURT Vise Restoration Kit
$70.00
×
Taig Micro Lathe End Cap
$12.00
×
Placeholder671B2590 O-Ring
$8.10
×
iSuck Mill T-Slot Shop Vacuum Cleaning Nozzle
$10.00
×
EARLY Cast Taig or Peatool Micro Lathe II Digital Read Out DRO
$45.00
×