Mini Mill and Mini Lathe Housing for MacPod.net Tachometer Electronics.

$25.00

Description

Jeff at MagPod.net makes a reasonably priced EXCELLENT Tachometer for the LittleMachineShop, MicroMart and other Mills and Lathes listed on the MacPod site. But, he makes only the tach board and wiring. You are left to your own devices to create an enclosure to house it. There are various renditions on Jeff’s site.

Edit: Wow, there are many more housings on the MacPod site since the last time I looked. 🙂

So, I fired up the 3D Printer and Laser and we came up with this. Super-Easy install. You’ll need a Dremel/pocket knife/heated X-Acto type blade/X-Acto saw/drill or coping saw to cut the plastic after using a Sharpie to make the slot. It does not need to be perfect, you’ll have a box covering to slot. Attach the wires per the MacPod instructions, stick thru the hole, peel the 3M tape off the back of the housing back and stick. Use the four screws to mount the circuitry into the box. Plug harness into the board and snap onto the back. There are tabs on the left and right to engage the two pieces together.

Link to the MacPod Tach: https://macpod.net/misc/sx2_tachometer/sx2_tachometer_kit_v2.php

 

 

Additional information

Weight .2 lbs
Cart
GlowForge Idler Pulley Wheel With Bearings
$50.00
×
ER32 Collet Box/Organizer
$156.00
×
3" KURT Vise Restoration Kit
$245.00
×
Magnetic Mini Mill Micro Limit Switch Assemblies
$24.00
×
Late Taig or Peatool Micro Lathe II Digital Read Out DRO
$180.00
×
Taig Collet Box/Organizer
$20.00
×
Taig Delrin T-Slot Chip Cleaner
$15.00
×
Magnetic Dial Indicator
$350.00
×
Thumb Driver 1/4" Hex
$15.00
×
GlowForge Tygon Coolant Hose
$132.00
×
Placeholder671B2590 O-Ring
$16.20
×
EMERGENCY!! 10mm Socket
$100.00
×
Magnetic Mill Vise Parallel Holders
$24.00
×
GlowForge Rear Exhaust Extension
$195.00
×
Glycol Coolant For GlowForge
$135.00
×
ER16 Collet Box/Organizer
$50.00
×
EARLY Cast Taig or Peatool Micro Lathe II Digital Read Out DRO
$225.00
×
Mini Mill and Mini Lathe Housing for MacPod.net Tachometer Electronics.
$200.00
×
GlowForge Daughter Board Dust Shield Draft Dodger
$150.00
×
Taig Micro Lathe End Cap
$8.00
×
30º 45º 60º Vise Angle Guides
$48.00
×
Rocker Tool Post for Taig Micro Lathe
$140.00
×
Mini Mill T-Slot Cleaner
$21.00
×
GlowForge Gantry Pulley / Wheel
$50.00
×
GlowForge Rear Carriage Tray Pulley Wheel
$75.00
×
iSuck Mill T-Slot Shop Vacuum Cleaning Nozzle
$20.00
×
Taig DRO Dial Read Out
$105.00
×
Three Inch Mill Vise Vice Speed Handle
$38.00
×
Taig Micro Lathe Spindle Lock
$90.00
×
Ryobi PBLHV701 Stick Vacuum Wall Mount Bracket
$22.50
×
SainSmart CNC 3018 Router 3/8" Aluminum Side Plates x4
$125.00
×
Loctite 380 Black Max For GlowForge Lid Hinge
$12.00
×
Mini Mill Chip Guard Shield
$35.00
×
Mini Mill Spindle Square
$85.00
×
SainSmart CNC 3018 Router Electronics Box w/Fan
$22.00
×