Glycol Coolant For GlowForge

$15.00

Category:

Description

The proper coolant for your GlowForge C02 Laser is Propylene Glycol, mixed at 30% mixed with distilled water. This eight ounce bottle, mixed with seventeen ounces of distilled water, is the proper coolant mixture.

Additional information

Weight .9 lbs

Related products

Remove GlowForge White Camera Lid CableGlowForge White Camera Lid Cable
Remove GlowForge Idler Pulley Wheel With BearingsGlowForge Idler Pulley Wheel With Bearings
Remove Rocker Tool Post for Taig Micro LatheRocker Tool Post for Taig Micro Lathe
Remove Placeholder671B2590 O-Ring
Remove Magnetic Dial IndicatorMagnetic Dial Indicator
Remove Mini Mill T-Slot CleanerMini Mill T-Slot Cleaner
Remove GlowForge Laser Tube Alignment ShimsGlowForge Laser Tube Alignment Shims
Remove Bandsaw Leveling FeetBandsaw Leveling Feet
Remove Magnetic Mill Jack SetMagnetic Mill Jack Set
Remove Caliper HangerCaliper Hanger
Cart
Late Taig or Peatool Micro Lathe II Digital Read Out DROLate Taig or Peatool Micro Lathe II Digital Read Out DRO
$45.00
×
Rocker Tool Post for Taig Micro LatheRocker Tool Post for Taig Micro Lathe
$35.00
×
EMERGENCY!! 10mm SocketEMERGENCY!! 10mm Socket
$60.00
×
65mm Bauer/Makita Trim Router Spacer65mm Bauer/Makita Trim Router Spacer
$10.00
×
GlowForge Gantry Pulley / WheelGlowForge Gantry Pulley / Wheel
$12.50
×
Magnetic Mill Jack SetMagnetic Mill Jack Set
$57.00
×
GlowForge Idler Pulley Wheel With BearingsGlowForge Idler Pulley Wheel With Bearings
$25.00
×
GlowForge Black Lid CableGlowForge Black Lid Cable
$105.00
×
Magnetic Mill Vise Parallel HoldersMagnetic Mill Vise Parallel Holders
$16.00
×
Magnetic Mini Mill Micro Limit Switch AssembliesMagnetic Mini Mill Micro Limit Switch Assemblies
$12.00
×
Mini Mill Spindle LED LightMini Mill Spindle LED Light
$60.00
×
GlowForge Rear Exhaust ExtensionGlowForge Rear Exhaust Extension
$15.00
×
GlowForge Rear Carriage Tray Pulley WheelGlowForge Rear Carriage Tray Pulley Wheel
$15.00
×
Taig Micro Lathe Spindle LockTaig Micro Lathe Spindle Lock
$18.00
×
ER11 Collet Box/OrganizerER11 Collet Box/Organizer
$10.00
×
Caliper HangerCaliper Hanger
$3.00
×
Mini Mill Chip Guard ShieldMini Mill Chip Guard Shield
$35.00
×
Thumb Driver 1/4" HexThumb Driver 1/4" Hex
$3.00
×
Checkout
-
$3.00